F065
Iwọn opin ti Paipu ita:
- A ṣeduro rẹ̀ nípasẹ̀ Ìwọ̀n Ilé-iṣẹ́ ti HL Cryogenic Equipment. A tún le ṣe é gẹ́gẹ́ bí ìbéèrè oníbàárà.
- Titẹ apẹrẹ:
- A ṣeduro ≤ bar 16. Tabi yan Iru Asopọ Alurinmorin (bar ≤40).
- Ohun èlò Pípù Òde
Láìsí ìbéèrè pàtàkì, ohun èlò tí a fi ń lo paipu inú àti paipu òde ni a ó yàn ní ọ̀nà kan náà.
3.1.3 Iru Asopọ Alurinmorin
odel
ìsopọ̀
Irú
Iwọn opin ti Pipe inu
Apẹrẹ titẹ
Ohun èlò
ti Pípù Inú
Boṣewa
Àkíyèsí
W010
00X
Iru Asopọ Alurinmorin fun Okun Amule Ti o Yipo Ti a Fi Idena Sisun
DN10, 3/8"
8 ~ 40 bar
Irin Alagbara 300 Series
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Iwọn opin ti Paipu ita: | |
| Apẹrẹ titẹ | Ohun èlò Pípù Inú. | A jẹ 304, | DN40, 1-1/2" | C jẹ́ 316, |
| D jẹ́ 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Apẹrẹ titẹ |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| A gbani nímọ̀ràn ≤ DN25 tàbí 1". Tàbí kí o yan irú ìsopọ̀ Bayonet Vacuum pẹ̀lú Flanges àti Bolts (láti DN10, 3/8" sí DN80, 3"), Irú ìsopọ̀ tí a so pọ̀ (láti DN10, 3/8" sí DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Boṣewa | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Iwọn opin ti Paipu ita: |
| A ṣeduro rẹ̀ nípasẹ̀ Ìwọ̀n Ilé-iṣẹ́ ti HL Cryogenic Equipment. A tún le ṣe é gẹ́gẹ́ bí ìbéèrè oníbàárà. | Ohun èlò Pípù Òde | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Irú | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Boṣewa | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Ìfúnpá Apẹrẹ. | / | DN25, 1" | DN25, 1" | / | |
| Ohun èlò Pípù Inú. | / | DN25, 1" | DN25, 1" | / | |
| C jẹ́ 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Iwọn opin ti Paipu inu:
| A gbani nímọ̀ràn ≤ DN25 tàbí 1". Tàbí kí o yan irú ìsopọ̀ Bayonet Vacuum pẹ̀lú Flanges àti Bolts (láti DN10, 3/8" sí DN80, 3"), Irú ìsopọ̀ tí a so pọ̀ (láti DN10, 3/8" sí DN150, 6") | Iwọn opin ti Paipu ita: |
| A ṣeduro rẹ̀ nípasẹ̀ Ìwọ̀n Ilé-iṣẹ́ ti HL Cryogenic Equipment. A tún le ṣe é gẹ́gẹ́ bí ìbéèrè oníbàárà. | Titẹ apẹrẹ: |
| A ṣeduro ≤ bar 16. Tabi yan Iru Asopọpọ Alurinmorin (bar ≤40) | Ohun èlò Pípù ÒdeLáìsí ìbéèrè pàtàkì, ohun èlò tí a fi ń lo paipu inú àti paipu òde ni a ó yàn ní ọ̀nà kan náà.3.2 Ètò Pípù Ìdáná Oníyẹ̀fun Oníyẹ̀fun3/S |
| 3.2.1 Iru Asopọ Bayonet Vacuum pẹlu Awọn Idimu | odel |
| ìsopọ̀ | Irú |
| Iwọn opin ti Pipe inu | Apẹrẹ titẹ |
| Ohun èlò | ti Pípù Inú |
| Boṣewa | Àkíyèsí |
HDB01008
Iru Asopọ Bayonet Vacuum pẹlu Awọn Idimu fun Okun Yiyi Ti a Fi Itura Ti o ni Irọrun
lDN10, 3/8"
lọ̀pá 8
| Irin Alagbara 300 Series C jẹ́ 316, | Ohun èlò Pípù Inú. | |
| A jẹ 304, | B jẹ́ 304L,C jẹ́ 316,D jẹ́ 316L, | |
| E jẹ miiran. | HLH | DB01508 |
| DN15, 1/2" | Titẹ apẹrẹ: | Titẹ apẹrẹ: |
| DN20, 3/4" | Titẹ apẹrẹ: | Titẹ apẹrẹ: |
| DN25, 1" | Titẹ apẹrẹ: | Titẹ apẹrẹ: |
| Iwọn opin ti Paipu ita: | Titẹ apẹrẹ: | Titẹ apẹrẹ: |
A ṣeduro ≤ bar 8. Tabi yan Iru Asopọ Bayonet Vacuum pẹlu Awọn Flanges ati Awọn Bolt (bar ≤16), Iru Asopọ Alurinmorin (bar ≤40)Ohun èlò Pípù ÒdeLáìsí ìbéèrè pàtàkì, ohun èlò tí a fi ń lo paipu inú àti paipu òde ni a ó yàn ní ọ̀nà kan náà.
Ipo Agbara:
HL-HX-X-Aaye naa nilo lati pese agbara si awọn fifa afẹfẹ ati lati sọ fun HL Cryogenic Equipment alaye ina agbegbe (Voltage ati Hertz).-00-X
3.2.2 Iru Asopọ Bayonet Vacuum pẹlu Awọn Flanges ati Awọn Bolt
odel
ìsopọ̀
Irú
Iwọn opin ti Pipe inu
Apẹrẹ titẹ
Ohun èlò
ti Pípù Inú
Boṣewa
Àkíyèsí
Nominal Diameter of Inner Pipe
00X
8 ~ 16 bar
DN10, 3/8"
8 ~ 16 bar
Irin Alagbara 300 Series
Design Pressure
Ìfúnpá Apẹrẹ.
08 jẹ́ 8bar,
16 jẹ́ 16bar.
Ohun èlò Pípù Inú.
A jẹ 304,
B jẹ́ 304L,
C jẹ́ 316,
D jẹ́ 316L,
E jẹ miiran.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Vacuum Insulated Alakoso Separator Series | DN10, 3/8" | Arméníà
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaranseIwọn opin ti Paipu ita:X | DN15, 1/2" | |||||
| FaranseA ṣeduro ≤ bar 16. Tabi yan Iru Asopọ Alurinmorin (bar ≤40).X | DN20, 3/4" | |||||
| FaranseIpo Agbara:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Faranse08 jẹ́ 8bar,00X | àti 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaranseÈdè Samoa00X | DN15, 1/2" | |||||
| FaranseSindhi00X | DN20, 3/4" | |||||
| FaranseÀwọn ará Tajiki00X | DN25, 1" | |||||
| FaranseThai00X | DN32, 1-1/4" | |||||
| FaranseUzbeki00X | DN40, 1-1/2" | |||||
| FaranseKhosa00X | DN50, 2" | |||||
| FaranseZulu00X | DN65, 2-1/2" | |||||
| FaranseOria00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Ipo Agbara:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Irin Alagbara 300 Series | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaranseDN15, 1/2"00X | DN15, 1/2" | |||||
| FaranseDN20, 3/4"00X | DN20, 3/4" | |||||
| FaranseDN25, 1"00X | DN25, 1" | |||||
| FaranseW03200X | DN32, 1-1/4" | |||||
| FaranseW04000X | DN40, 1-1/2" | |||||
| FaranseW05000X | DN50, 2" | |||||
| FaranseW06500X | DN65, 2-1/2" | |||||
| FaranseW08000X | DN80, 3" | |||||
| HOkun jaketi igbale00X | DN100, 4" | |||||
| HÀtọwọdá Ìṣàn Atẹ́gùn Omi China00X | DN125, 5" | |||||
| HIye owo osunwon China China ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSEto Fọpu Igbale Yiyi00X | Vacuum Insulated Alakoso Separator Series | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaranseWhatsapp00X | DN15, 1/2" | |||||
| FaranseWeChat00X | DN20, 3/4" | |||||
| FaranseJẹ́mánì00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Giriki
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Àwọn ará Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Arméníà
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHÍstóníàX | DN15, 1/2" | |||||
| HLHFrisianX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Àwọn ará Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDÈdè Samoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDÀwọn ará Tajiki00X | DN25, 1" | |||||
| HLHDThai00X | DN32, 1-1/4" | |||||
| HLHDUzbeki00X | DN40, 1-1/2" | |||||
| HLHDKhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOria00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
